The MD-HPULN PS is the Dual Rail power supply, which makes possible to use it in two modi:
- Both rails can be used and adjusted between 0-<15V completely unindependent, i.e. for power two devices.
- Connecting both sides with a jumper, both rails become a dual polarity / symmetric power supply.
I.e. for use with Buffers, OPA's, AD/DA-converter and other devices with a need of a symmetric power supply.
As usual this power supply comes fully assembled and tested for seamless working.
For more information regarding heat and transformator recommandation please note the instructions in our FAQ.
MD-HPULN PS Dual Rail 2x1,5A
Dimensions: 68 x 51mm / 2,68 x 2"
Height (without spacers): 37mm / 1,46"
PCB copper thickness: 70µm / 2oz
Voltage input: max. <14VAC / 0-<20VDC
Output Voltage: Adjustable 0-<15VDC
(Preadjusted to your desired output voltage)
Output Current: 2x 1,5A max
Ultralow RMS Noise: 0.8µVRMS (10Hz to 100kHz) per regulator
Further reduces noise by 3x LT3045 per rail in parallel operation
Ultralow Spot Noise: 2nV/√Hz at 10kHz
Ultrahigh PSRR: 76dB at 1MHz
Wide Input Voltage Range: 1.8V to 20V
High Bandwidth: 1MHz
High quality parts only
Low ESR capacitors
Low tolerance / TC resistors
Aluminium-Polymer capacitors (OS-CON, K750)
Soldered with silver alloy